|
Wednesday, June 3, 2015
| Time | Event | |
| 08:00 - 09:15 | Registration | |
| 09:15 - 09:45 | Introduction (Marie-Curie) - O. Allix, N. Moes, J. Oliver, M. Jirasek | |
| 09:45 - 10:30 | Plenary: Distributed Damage and Enhanced Permeability in Confined Brittle Materials under Triaxial Compression (Marie-Curie) - M. Ortiz (Chair N. Moes) | |
| 10:30 - 10:45 | Coffee break | |
| 10:45 - 12:45 | MS9: Industrial applications (103) - C. Huchette, J. C. Gálvez | |
| 10:45 - 11:15 | › Influence of residual stresses on lifespan and crack path assessment of a disk blade connection (Keynote) - Benoît Dompierre, Cenaero ASBL | |
| 11:15 - 11:35 | › Damage evolution in pearlitic steel specimens under tension by means of X-ray computed tomography - Jaime Galvez, Universidad Politécnica Madrid | |
| 11:35 - 11:55 | › Contribution of advanced and non linear material behavior law for sizing industrial composite structures - Cédric HUCHETTE, Onera - The French Aerospace Lab | |
| 11:55 - 12:15 | › Investigation in rolling contact fatigue crack growth in rails of SNCF network - Si Hai Mai, SNCF | |
| 12:15 - 12:35 | › Numerical modelling of sheet-metal blanking using XFEM with ductile fracture - Spela Bolka, Hidria Rotomatika | |
| 10:45 - 12:45 | MS2: Advances in the Experiment-Modeling Dialog (112) - S. Roux, J. Réthoré | |
| 10:45 - 11:15 | › Integration of Micromechanical Measurements to Support Microstructure-Based Modeling (Keynote) - Eric Landis, University of Maine | |
| 11:15 - 11:35 | › Mechanical behavior and failure of irradiated filled elastomer using molecular dynamics - Morgane Mahaud, Matériaux, ingénierie et sciences | |
| 11:35 - 11:55 | › Heterogeneity informed quantitative micromechanical approach of ductile fracture in 6xxx aluminium alloys. - Florent Hannard, Université Catholique de Louvain | |
| 11:55 - 12:15 | › Modelling of concrete fracture at aggregate level using FEM and DEM - Michal Nitka, Gdańsk University of Technology | |
| 12:15 - 12:35 | › Numerical modeling of propagating compaction bands in brittle granular media - Francois Guillard, School of Civil Engineering | |
| 10:45 - 12:45 | MS16: Theory of fracture, crack propagation criteria, and crack tracking algorithms (Condorcet) - M. Ortiz | |
| 10:45 - 11:15 | › Recent progress and remaining challenges in the mathematics of sharp interface fracture evolution (Keynote) - Christopher Larsen, Department of Mathematical Sciences | |
| 11:15 - 11:35 | › From micro- to macroscale fracture properties of highly heterogeneous interfaces: towards a perturbation-based numerical method? - Veronique Lazarus, Fluides, automatique, systèmes thermiques | |
| 11:35 - 11:55 | › Fracture models for elasto-plastic materials as limits of gradient damage models coupled with plasticity: the antiplane case - Rodica Toader, Dipartimento di Matematica e Informatica - Universita Udine | |
| 11:55 - 12:15 | › Effect of Non-Uniform Stress Field on Bi-dimensional Cohesive Crack Initiation and Propagation - PHAM Tuan Hiep, Laboratoire de Mécanique des Structures Industrielles Durables, Laboratoire de mécanique des solides, EDF R&D | |
| 10:45 - 12:45 | MS6: Fracture and contact, fretting, cohesive interface models (Fonteneau) - F. Gatuingt, J-F. Molinari | |
| 10:45 - 11:05 | › A 3D multiscale cohesive zone model accounting for friction, damage and interlocking - Marco Albarella, Universita' degli studi del Sannio, Dipartimento di Ingegneria | |
| 11:05 - 11:25 | › A quantitative investigation of the competition between cohesive and adhesive fracture at interfaces - Joris Remmers, Eindhoven University of Technology | |
| 11:25 - 11:45 | › Mesoscopic analysis of concrete failure behavior under high temperature effects - Guillermo Etse, CONICET and University of Buenos Aires | |
| 11:45 - 12:05 | › Simulation of ductile fracture of aluminum alloy using a triaxiality dependent cohesive zone model - Anuradha Banerjee, IIT Madras - Faizan Rashid, IIT Madras | |
| 12:05 - 12:25 | › A mesoscopic approach to study the influence of aggregates spatial arrangement on concrete dynamic behavior - Silvère PIERRE, Laboratoire de Mécanique et Technologie | |
| 12:25 - 12:45 | › On the development of a cohesive model for crack propagation in wood under relative humidity variations - Ngoc Anh Phan, Institut de Mécanique et d'Ingénierie de Bordeaux | |
| 10:45 - 12:45 | MS14: Nonlocal damage models and other regularized approaches & ·Transition from damage to fracture (Marie-Curie) - C. Miehe, M. Jirasek, N. Moes | |
| 10:45 - 11:15 | › Nucleation, initiation, and propagation of cracks in gradient damage models (Keynote) - Corrado Maurini, Institut Jean Le Rond d'Alembert | |
| 11:15 - 11:35 | › Phase-field modeling of dynamic instabilities in brittle fracture - Alain Karma, Northeastern University | |
| 11:35 - 11:55 | › Algorithmic aspects of the efficient phase-field computing of fracture - Tymofiy Gerasimov, Institute of Applied Mechanics (Technische Universität Braunschweig) | |
| 11:55 - 12:15 | › Relationships between the cohesive zone model (CZM) and thick level set (TLS) damage model for quasi-brittle fracture - Nicolas Moës, Institut de Recherche en Génie Civil et Mécanique | |
| 10:45 - 12:45 | MS1: Advanced finite element technology for discontinuities and evolving interfaces (Tocqueville) - B. Sluys, J. Alfaiate | |
| 10:45 - 11:15 | › A new generalized finite element method for two-scale simulations of propagating cohesive fractures in 3-D (Keynote) - Armando Duarte, University of Illinois at Urbana Champaign | |
| 11:35 - 11:55 | › A stabilization technique for nearly singular extended finite elements used for static and dynamic crack analysis - Stefan Loehnert, Leibniz Universität Hannover | |
| 11:35 - 11:55 | › Numerical modelling of load-sequence effects on fatigue crack growth - Lars Voormeeren, TNO, Delft University of Technology, Faculty of Civil Engineering and Geosciences | |
| 11:55 - 12:15 | › Modelling of Damage in Reinforced Beam-Column Elements with Embedded Discontinuities - Gelacio Juárez-Luna, Departamento de Materiales, Universidad Autónoma Metropolitana | |
| 12:15 - 12:35 | › Determination of the fracture parameters in three-dimensional structure by the finite element method - lallam mostefa, University of mascara Algeria - Mamouri Said, LMS - University of bechar - Adnan Ibrahimbegovic, Universié de technologie de Compiègne | |
| 12:45 - 13:45 | Lunch | |
| 13:45 - 15:45 | MS9: Industrial applications (103) - P. Massin, Ph. Pasquet | |
| 13:45 - 14:05 | › Computational and Experimental Fracture Assessment of a Cracked Hand Wheel - Goran Vukelic, Faculty of Maritime Studies, University of Rijeka | |
| 14:05 - 14:25 | › Modelling and Simulation of TB32 Crash Test of N2-W4-A Category Safety Barrier on Road Bend - Marian Klasztorny, Military University of Technology, Faculty of Mechanical Engineering, Department of Mechanics and Applied Computer Science | |
| 14:25 - 14:45 | › Modeling Failure Progression in Structures Informed by Demolition and Forensic Experience - Francesca Brando, Thornton Tomasetti | |
| 14:45 - 15:05 | › Current status in fuel performance codes of cracks and damage modelling - Thomas Helfer, French Alternative Energies and Atomic Energy Commission, Fuel Study Department, Fuel Simulation Laboratory | |
| 15:05 - 15:25 | › Finite Element Analysis of Ductile Fracture during Shearing Process of Shield Slot Plate for Molten Carbonate Fuel Cell - Ho Won Lee, Korea Institute of Materials Science | |
| 13:45 - 15:45 | MS2: Advances in the Experiment-Modeling Dialog (112) - S. Roux, J. Réthoré | |
| 13:45 - 14:05 | › X-DIC for ductile tearing monitoring using ultra high resolution cameras - Michel CORET, Institut de Recherche en Génie Civil et Mécanique | |
| 14:05 - 14:25 | › Mode I-III Decomposition of the J-integral from Digital Image Correlation Displacement Data - Matthew Molteno, Université de Stellenbosch | |
| 14:25 - 14:45 | › Crack propagation in inelastic pre-strained specimen - Sven von Ende, Rolls-Royce Germany | |
| 14:45 - 15:05 | › Mixed mode fracture of mortar joints in masonry buildings - Marie Sauve, Institut de Mécanique et d'Ingénierie de Bordeaux | |
| 15:05 - 15:25 | › Experimental database for mixed-mode crack propagation in concrete: comparison between experimental and numerical results using full-field measurements - Andreea Carpiuc-Prisacari, Laboratoire de Mécanique et Technologie | |
| 15:25 - 15:45 | › Extraction of SIFs and crack tip detection for curved cracks using digital images - Julien Réthoré, Laboratoire de Mécanique des Contacts et des Structures | |
| 13:45 - 15:45 | MS16: Theory of fracture, crack propagation criteria, and crack tracking algorithms (Condorcet) - C. Larsen, F. Bobaru | |
| 13:45 - 14:05 | › On the morphology of dynamic cracks surfaces and how to resolve them computationally - Florin Bobaru, University of Nebraska - Lincoln | |
| 14:05 - 14:25 | › Study of fracture patterns generated by different failure criteria in ordinary state-based Peridynamics - Giulia Sarego, Department of Industrial Engineering, University of Padua, Centre of Studies and Activities for Space "G. Colombo" | |
| 14:25 - 14:45 | › Representation of stress in plane cracked solids with Laurent series - Gaetan Hello, Laboratoire de Mecanique et d'Energetique d'Evry | |
| 14:45 - 15:05 | › Crack-surface based path-following control for phase-field modeling of brittle fracture - nitish singh, Eindhoven University of Technology | |
| 15:05 - 15:25 | › Mixed mode fracture separation in orthotropic media due to mechanical and thermal effects - Rostand Moutou Pitti, Institut Pascal | |
| 13:45 - 15:45 | MS10: Innovative trends and applications in fracture mechanics (Fonteneau) - U. Perego | |
| 13:45 - 14:15 | › Fail-safe Design of Structures Based on the Material Force Approach and Uncertainty Analysis (Keynote) - Michael Kaliske, Technische Universität Dresden | |
| 14:15 - 14:35 | › Explicit simulation of blade cutting and through-the-thickness fracture in multi-layer, thin-walled structures - Federica Confalonieri, Dipartimento di Ingegneria Civile e Ambientale, Politecnico di Milano | |
| 14:35 - 14:55 | › Comparison of fracture prediction models on sheet metal blanking simulations - Cristian Canales, Department of Aerospace and Mechanical Engineering, University of Liège | |
| 14:55 - 15:15 | › Analyzing 3D cracks using arbitrary tetrahedral meshes - Morteza Nejati, Imperial College London | |
| 15:15 - 15:35 | › Investigation into the rupture of the grains in an granular material in an oedometric loading and the fracture energy - Aymen Seyf Eddine Salhi, University of Biskra laboratoire de recherche Génie civil | |
| 13:45 - 15:45 | MS14: Nonlocal damage models and other regularized approaches & ·Transition from damage to fracture (Marie-Curie) - C. Miehe, M. Jirasek, N. Moes | |
| 13:45 - 14:15 | › A Geometry-Based Anisotropic Gradient-Enhanced Damage Model for Modelling Masonry Failure (Keynote) - Bram Vandoren, Hasselt University, Faculty of Engineering Technology | |
| 14:15 - 14:35 | › Modelling of microcracking in microtomography image-based models of cement materials using phase field method - Julien YVONNET, Université Paris-Est | |
| 14:35 - 14:55 | › A transient gradient damage model based on the homogenization of inter-granular failure - Leong Hien Poh, National University of Singapore | |
| 14:55 - 15:15 | › Nonlocal Regularization for Loss of Ellipticity in Inelastic Problems - Alejandro Mota, Sandia National Laboratories [Livermore] | |
| 13:45 - 15:45 | MS1: Advanced finite element technology for discontinuities and evolving interfaces (Tocqueville) - B. Sluys, J. Alfaiate | |
| 13:45 - 14:05 | › Mixed-mode fracture in strong discontinuities - Jorge ALFAIATE, 1Department of Civil Engineering, Architecture and Geosciences, Técnico, Universidade de Lisboa | |
| 14:05 - 14:25 | › Cohesive crack with friction growing at the interface between dissimilar isotropic materials - silvio valente, Politecnico di Torino [Torino] | |
| 14:25 - 14:45 | › An adaptive body-fitted monolithic method for modeling the fracture of heterogeneous microstructures - Modesar Shakoor, Centre de Mise en Forme des Matériaux | |
| 14:45 - 15:05 | › On the treatment of crack boundary conditions in phase field models of dynamic fracture - Michael Strobl, Institute of Mechanics, Karlsruhe Institute of Technology | |
| 15:05 - 15:25 | › Finite element interface model for simulating delamination using a thick level set approach - mohammad latifi, TU Delft | |
| 15:45 - 16:00 | Coffee break | |
| 16:00 - 18:00 | MS7: Fracture and damage of composites and laminates (103) - J. Remmers | |
| 16:00 - 16:20 | › Dynamic effects in unidirectional fiber-reinforced composites: a peridynamic analysis - Florin Bobaru, University of Nebraska - Lincoln | |
| 16:20 - 16:40 | › A New Mixed DEM/FEM Approach to Model Advanced Damage of Reinforced Concrete - Serguei Potapov, Institut des Sciences de la Mécanique et Applications Industrielles, Électricité de France - R&D | |
| 16:40 - 17:00 | › A mesh independent simplified cohesive segment method to model matrix cracking in composites. - Supratik Mukhopadhyay, Advanced Composites Centre for Innovation and Science | |
| 17:00 - 17:20 | › Modelling multiple delamination and intralaminar cracks using a single-layer shell approach - Martin Fagerström, Chalmers University of Technology | |
| 17:20 - 17:40 | › Translaminar fracture of WRM composite using Random Spring Network - Anuradha Banerjee, IIT Madras | |
| 17:40 - 18:00 | › A computational approach to the ultimate failure of unidirectional ceramic-matrix composites - Guillaume Couégnat, Laboratoire des Composites Thermostructuraux | |
| 16:00 - 18:00 | MS15: Quasi-brittle failure with applications to concrete and fiber-reinforced concrete (112) - G. Pijaudier-Cabot | |
| 16:00 - 16:20 | › Numerical Simulation of Fracturing in Steel Fiber Reinforced Concrete Structures using Interface Solid Elements - Yijian Zhan, Institute for Structural Mechanics, Ruhr-University Bochum | |
| 16:20 - 16:40 | › Embedded Finite Element Method based on plate-kinematics for reinforced concrete elements - Ejona Kishta, Laboratoire d'Etudes de Mécanique Sismique | |
| 16:40 - 17:00 | › Numerical simulations to determine the constitutive parameters of the oxide layer in corrosion of reinforced concrete - Beatriz Sanz, Universidad Politécnica de Madrid, Dep. Ciencia de Materiales | |
| 17:00 - 17:20 | › A Smooth unloading-reloading approach for modelling quasi-brittle failure - Waled Alnaas, Cardiff University | |
| 17:20 - 17:40 | › General sequentially linear method for saw-teeth constitutive relations - Jan Elias, Brno University of Technology, Faculty of Civil Engineering, Institute of Structural Mechanics | |
| 17:40 - 18:00 | › Eigenerosion: extension and applications to heterogeneous media - Lionel Bichet, Laboratoire de mécanique et génie civil, Laboratoire de micromécanique et intégrité des structures | |
| 16:00 - 18:00 | MS16: Theory of fracture, crack propagation criteria, and crack tracking algorithms (Condorcet) - V. Lazarus, N. Moës | |
| 16:00 - 16:20 | › Three-dimensional crack nucleation, growth and coalescence using the Thick Level Set approach to fracture - Nicolas Moës, Ecole Centrale de Nantes | |
| 16:20 - 16:40 | › 3D crack propagation with X-FEM cohesive elements - Patrick Massin, Institute of Mechanical Sciences and Industrial Applications | |
| 16:40 - 17:00 | › Fast marching method for threedimensional crack propagation - Matthieu Le Cren, Laboratoire de Mécanique des Structures Industrielles Durables | |
| 17:00 - 17:20 | › Finite-element modeling and analyses for quasicrystals with cracks - Zhibin Wang, Institute of Mechanics, University of Kassel | |
| 17:20 - 17:40 | › Crack path predictions and experiments in structures with interfaces - Paul Judt, University of Kassel, Institute of Mechanics | |
| 17:40 - 18:00 | › Modelling of Quasi-Brittle Fracture in Large Scale Coarse Mesh Finite Element Models using the FEMME (Finite Element Microstructure MEshfre) Multiscale Model - Luis Saucedo-Mora, University of Oxford, Department of Materials | |
| 16:00 - 18:00 | MS10: Innovative trends and applications in fracture mechanics (Fonteneau) - M. Kaliske | |
| 16:00 - 16:20 | › Design of Sheet Metal Forming Process for Reducing the Stress Concentration of Corrugated Plate for Molten Carbonate Fuel Cell - Young-Seok Oh, Korea Institute of Materials Science | |
| 16:20 - 16:40 | › Influence of Autocorrelation Length in Random Lattice-Particle Model - Jana Kaderova, Brno University of Technology | |
| 16:40 - 17:00 | › Strain Rate Influence on the Elastoplastic Damage Behaviour of Nodular Cast Iron - Ivica Skozrit, Faculty of Mechanical Engineering and Naval Architecture | |
| 16:00 - 18:00 | MS14: Nonlocal damage models and other regularized approaches & ·Transition from damage to fracture (Marie-Curie) - C. Miehe, M. Jirasek, N. Moes | |
| 16:00 - 16:20 | › Smeared damage model and crack localization for RC multi-fiber beam descriptions - Jacky Mazars, Grenoble Institute of Technology | |
| 16:20 - 16:40 | › Experimental and theoretical investigations of concrete fatigue using damage approach with non-local softening - Ireneusz Marzec, Gdańsk University of Technology | |
| 16:40 - 17:00 | › Combined XFEM-continuous damage mechanics approach for three dimensional concrete crack propagation - Simon-Nicolas Roth, Hydro-Québec Production | |
| 17:00 - 17:20 | › Formulation of a constitutive law with a gradual transition from continuous to discontinuous descriptions of cracks in concrete - Jerzy Bobinski, Gdansk University of Technology | |
| 17:20 - 17:40 | › Intermittency and localization in quasi-brittle failure of heterogeneous materials: A numerical and analytical study - Estelle Berthier, Institut Jean Le Rond d'Alembert |
Thursday, June 4, 2015
| Time | Event | |
| 09:00 - 09:45 | Plenary: Multi-Phase Modeling Of Chemo-Mechanical Degradation In Concrete (Marie-Curie) - C. Comi (Chair M. Jirasek) | |
| 09:45 - 10:30 | Plenary: Experiments And Numerical Simulations Of Initiation And Growth Of Cracks Under Mixed Mode I + III Loading (Marie-Curie) - K. Ravi-Chandar (Chair M. Jirasek) | |
| 10:30 - 10:45 | Coffee break | |
| 10:45 - 12:45 | MS7: Fracture and damage of composites and laminates (103) - S. Hallett | |
| 10:45 - 11:15 | › Transverse cracking scenarios under oxidation and mechanical loading in polymer matrix composites (Keynote) - Federica Daghia, Laboratoire de Mécanique et Technologie | |
| 11:15 - 11:35 | › A general Finite Fracture Mechanics model for crack initiation in adhesive lap joints - Nicolas Stein, Fachgebiet Strukturmechanik, Technische Universität Darmstadt | |
| 11:35 - 11:55 | › Pattern based description of a CMC yarn failure combining GFEM multi-scale & Finite Fracture Mechanics - Orestis Friderikos, LMT-Cachan | |
| 11:55 - 12:15 | › Simulation of ply damage and delamination in multilayer composites to predict the residual compressive strength after impact loading - Martin Springer, Institute of Lightweight Design and Structural Biomechanics, Vienna University of Technology | |
| 10:45 - 12:45 | MS15: Quasi-brittle failure with applications to concrete and fiber-reinforced concrete (112) - I. Carol | |
| 10:45 - 11:05 | › Experimental and numerical investigations of the correlations involved during failure in quasi-brittle materials - David Grégoire, Laboratoire des Fluides Complexes et leurs Réservoirs | |
| 11:05 - 11:25 | › Mesoscale modelling of concrete quasi-brittle behaviour - Alexandre GANGNANT, Institut de Mécanique et d'Ingénierie de Bordeaux | |
| 11:25 - 11:45 | › Analysis of Crack Propagation Instabilities in Rock Specimens via Numerical Analysis of Wedge Splitting Tests - Ignacio Carol, Universitat Politècnica de Catalunya | |
| 11:45 - 12:05 | › Benefits of numerical experimentation to formulate and calibrate constitutive laws for concrete - Maxime Vassaux, Laboratoire de Mécanique et Technologie | |
| 12:05 - 12:25 | › A thermodynamically consistent framework to couple microplane damage and plasticity models - Aamir Dean, Institute of Structural Analysis, Leibniz Universität Hannover | |
| 12:25 - 12:45 | › FE analyses of a coupled energetic-statistical size effect in concrete beams under bending - Ewelina Syroka-Korol, Gdańsk University of Technology | |
| 10:45 - 12:45 | MS16: Theory of fracture, crack propagation criteria, and crack tracking algorithms (Condorcet) - A. Pandolfi, R. Toader | |
| 10:45 - 11:15 | › Intrinsic Brittleness of Magnesium (Keynote) - William Curtin, Ecole Polytechnique Fédérale de Lausanne | |
| 11:15 - 11:35 | › Plasticity-induced crack closure during cyclic propagation: numerical prediction of crack shape evolution - Catherine Gardin, Institut P' CNRS - Université de Poitiers - ENSMA UPR 3346 SP2MI | |
| 11:35 - 11:55 | › Assessment of Size-Dependent Fatigue Failure Modes Using a Cyclic Cohesive Zone Model - Stephan Roth, TU Bergakademie Freiberg, Institute of Mechanics and Fluid Dynamics | |
| 11:55 - 12:15 | › Effect of brittle fracture in a metaconcrete slab under shock loading - Anna Pandolfi, Dipartimento di Ingegneria Civile ed Ambientale | |
| 10:45 - 12:45 | MS14: Nonlocal damage models and other regularized approaches & ·Transition from damage to fracture (Marie-Curie) - C. Miehe, M. Jirasek, N. Moes | |
| 10:45 - 11:15 | › Mixing first- and second-gradient models in finite element simulations of ductile rupture (Keynote) - Jean-Baptiste Leblond, Sorbonne Universites, Universite Pierre et Marie Curie | |
| 11:15 - 11:35 | › A non-local damage model for ductile fracture - Jose Cesar de Sa, Mariana Seabra | |
| 11:35 - 11:55 | › Ductile damage modeling with locking-free regularized GTN model - Yi ZHANG, EDF R&D | |
| 11:55 - 12:15 | › Numerical treatment of the damage/crack transition in a Gurson ductile material - Johannes Wolf, Institut Clément Ader | |
| 12:15 - 12:35 | › 3D ductile crack propagation with the XFEM - Steffen Beese, Leibniz Universität Hannover | |
| 10:45 - 12:45 | MS13: Multi-scale analysis (Tocqueville) - M. G. D. Geers, A. E. Huespe, S. Loehnert, X. Oliver, P. Wriggers | |
| 10:45 - 11:15 | › A Multiscale Approach to Fracture in Brick-Mortar Masonry Composites (Keynote) - Kaspar Willam, University of Houston | |
| 11:15 - 11:35 | › 3D dislocation dynamics simulation of crack shielding and blunting in FCC metals - Laurent Korzeczek, Laboratoire d'étude des microstructures | |
| 11:35 - 11:55 | › Fracture initiation in multi-phase materials: a micromechanical approach - Ron Peerlings, Eindhoven University of Technology | |
| 11:55 - 12:15 | › Multiscale homogenization for ductile materials with initial voids: an arc length based procedure for the rve constitutive modeling - Ayrton Ferreira, Sao Carlos School of Engineering - University of São Paulo | |
| 12:45 - 13:45 | Lunch | |
| 13:45 - 15:45 | MS3: Cracking due to coupled processes, including durability mechanics and hydraulic fracture (103) - I. Carol, K. Willam | |
| 13:45 - 14:05 | › 3D simulation of interface debonding driven by fluid injection - Vasily Lapin, Institute of Computational Technologies SB RAS | |
| 14:05 - 14:25 | › A microstructural model of porosity based on brittle damage - Anna Pandolfi, Dipartimento di Ingegneria Civile ed Ambientale | |
| 14:25 - 14:45 | › Hydrogen-assisted crack propagation modelling with a cohesive zone model approach - Mandana Arzaghi, Institut Pprime | |
| 14:45 - 15:05 | › 3D analysis of hydraulic fracture with zero-thickness interface elements, comparison with GDK and PKN analytical methods - Daniel Garolera, Universitat Politècnica de Catalunya [Barcelona] | |
| 15:05 - 15:25 | › Numerical modeling of hydraulic fracturing under the influence of natural faults. - Ernst Remij, Eindhoven University of Technology | |
| 15:25 - 15:45 | › Lattice modelling of hydraulic fracture - Gilles Pijaudier-Cabot, Laboratoire des Fluides Complexes et leurs Réservoirs | |
| 13:45 - 15:45 | MS5: Dynamic fracture, fragmentation and impact (112) - A. Combescure, J. Ozbolt | |
| 13:45 - 14:15 | › Dynamic Fracture of Materials and Structures (Keynote) - Josko Ozbolt, University of Stuttgart | |
| 14:15 - 14:35 | › Numerical Analyses of Fracture and Failure of Concretes under Dynamic Loading Conditions - Gengsheng Wang, The Swedish Defence Research Agency | |
| 14:35 - 14:55 | › Fracture of Recycled Aggregate Concrete under High Loading Rates - Yunping Xi, University of Colorado at Boulder | |
| 14:55 - 15:15 | › Impact Comminution of Solids Due to Progressive Crack Growth Driven by Kinetic Energy of High-Rate Shear - Zdenek Bazant, Northwestern University | |
| 15:15 - 15:35 | › Simulation of dynamic tensile failure of quasi-brittle materials with a rate dependent, stress-enhanced nonlocal damage model - Luis Pereira, Delft University of Technology [[DELFT], Portuguese Air Force Academy | |
| 13:45 - 15:45 | MS4: Ductile fracture, modeling of shear bands and necking (Condorcet) - P.-O. Bouchard J. M. A. César de Sá , R. H. J. Peerlings | |
| 13:45 - 14:05 | › Localization and damage interactions in Al-alloy sheets: in situ 3D measurements - Thilo Morgeneyer, Centre des Matériaux | |
| 14:05 - 14:25 | › Ductile damage analysis by particles tracking in large tomographic dataset - Christophe Le Bourlot, Matériaux, ingénierie et sciences | |
| 14:25 - 14:45 | › In situ 3D observation of ductile failure mechanisms in cast iron under shear loading - Lutz Zybell, TU Bergakademie Freiberg | |
| 14:45 - 15:05 | › Micromechanical modelling of ductile fracture mechanisms using a new body-fitted immersed volume method - Pierre-Olivier Bouchard, Mines-Paristech, Centre de Mise en Forme des Matériaux | |
| 15:05 - 15:25 | › Plasticity-damage couplings in Titanium alloys - Oana Cazacu, University of Florida/REEF | |
| 13:45 - 15:45 | MS14: Nonlocal damage models and other regularized approaches & ·Transition from damage to fracture (Marie-Curie) - C. Miehe, M. Jirasek, N. Moes | |
| 13:45 - 14:05 | › Gradient-enriched models: the role of boundary conditions on failure initiation and propagation - Antonio Rodríguez-Ferran, Universitat Politecnica de Catalunya | |
| 14:05 - 14:25 | › Nonlocal Averaging Near Boundaries and Its Influence on Size Effect - Milan Jirásek, Czech Technical University in Prague | |
| 14:25 - 14:45 | › Isotropic and anisotropic damage-dependent interactions motivated by internal time - Rodrigue Desmorat, ENS Cachan | |
| 14:45 - 15:05 | › The Thick Level Set approach, towards simulations coupling local and non-local evolutions. - Kévin Moreau, Institut de Génie civil et Mécanique | |
| 15:05 - 15:25 | › Strain localisation from eikonal nonlocal damage formulation with evolving internal length - Cédric Giry, Laboratoire de Mécanique et Technologie | |
| 15:25 - 15:45 | › A transition approach from a local second gradient model to a cohesive zone model - Panagiotis Kotronis, Ecole Centrale de Nantes - Institut de Recherche en Génie Civil et Mécanique (GeM) | |
| 13:45 - 15:45 | MS13: Multi-scale analysis (Tocqueville) - M. G. D. Geers, A. E. Huespe, S. Loehnert, X. Oliver, P. Wriggers | |
| 13:45 - 14:05 | › Multiscale Schemes for Modelling Fracture in Soft and Brittle Materials under Impact - Amin Karamnejad, Delft University of Technology [[DELFT] | |
| 14:05 - 14:25 | › Computational homogenization of fracturing continua using weakly periodic boundary conditions - Erik Svenning, Chalmers University of Technology | |
| 14:25 - 14:45 | › X-FEM based computational homogenization-localization for propagating discontinuities - Emanuela Bosco, Eindhoven University of Technology | |
| 14:45 - 15:05 | › Numerical simulation of damage patterns in brittle materials under thermo-mechanical loading - Dimitri Henneberg, University of Kassel | |
| 15:05 - 15:25 | › Determination of the Effective Fracture Behavior of Heterogeneous Materials by a Phase Field Approach - Charlotte Kuhn, Computational Mechanics | |
| 15:25 - 15:45 | › Compressive failure of composites: A computational homogenization approach - Saeid Nezamabadi, Laboratoire de mécanique et génie civil | |
| 15:45 - 16:00 | Coffee break | |
| 16:00 - 17:20 | MS7: Fracture and damage of composites and laminates (103) - M. Fagerstrom | |
| 16:00 - 16:20 | › A Phenomenological Damage Model for Elastoplastic Behavior of Particle Reinforced TRIP-Steel Matrix Composites based on Micromechanical Simulations - Meinhard Kuna, TU Bergakademie Freiberg, Institute of Mechanics and Fluid Dynamics | |
| 16:20 - 16:40 | › Micro-mechanical analysis of the in situ effect in polymer composite laminates - Albertino Arteiro, Faculdade de Engenharia da Universidade do Porto [Porto] | |
| 16:40 - 17:00 | › Void shape effects and porosity ratcheting of elasto-plastic materials subjected to cyclic loading - Kostas Danas, CNRS, Ecole Polytechnique | |
| 17:00 - 17:20 | › Numerical Simulation and Analysis of a Progressive Failure of Notched Composite Laminates Based on Elastoplastic Damage Model - Evgeny Morozov, The University of New South Wales (AUSTRALIA) | |
| 16:00 - 17:40 | MS5: Dynamic fracture, fragmentation and impact (112) - A. Combescure, J. Ozbolt | |
| 16:00 - 16:20 | › Peridynamic modeling of crack branching and impact on polycrystalline ceramics - Florin Bobaru, University of Nebraska - Lincoln | |
| 16:20 - 16:40 | › Mass and velocity of fragments in impact fragmentation - Gergo Pal, Department of Theoretical Physics, University of Debrecen | |
| 16:40 - 17:00 | › Inverse analysis in fracture mechanics: Comparison of two numerical methods for spalling test simulations - Tim Dally, Universität Siegen [Siegen] | |
| 17:00 - 17:20 | › Digital image analysis of ASB assisted dynamic fracture under impact loading - Emile Roux, Institut Clément Ader | |
| 17:20 - 17:40 | › Multiscale simulation of damage and fracture of ceramic nanocomposites under intensive pulse loading - Vlafdimir A. Skripnyak, National Research Tomsk Polytechnic University, Reseach Instutute of Strength Physics and Material Sciences SB RAS, Tomsk State University | |
| 16:00 - 17:20 | MS4: Ductile fracture, modeling of shear bands and necking (Condorcet) - P.-O. Bouchard J. M. A. César de Sá , R. H. J. Peerlings | |
| 16:00 - 16:20 | › A bipotential-based approach of ductile porous materials having a non-associated matrix: theory and numerical assessment - Djimédo Kondo, IJLRDA | |
| 16:20 - 16:40 | › New three-dimensional strain-rate potentials for isotropic porous metals: role of the plastic flow of the matrix - Benoit Revil-Baudard, University of Florida/REEF | |
| 16:40 - 17:00 | › Porous materials with Mohr-Coulomb matrix: theoretical investigation and numerical validation - Kokou Anoukou, Anoukou | |
| 17:00 - 17:20 | › Mesh objective models for ductile fracture based on a damage phase field concept - Ragnar Larsson, Chalmers University of Technology | |
| 16:00 - 17:20 | MS14: Nonlocal damage models and other regularized approaches & ·Transition from damage to fracture (Marie-Curie) - C. Miehe, M. Jirasek, N. Moes | |
| 16:00 - 16:20 | › Microdamage modeling of crack initiation and propagation in metal single crystals - Samuel Forest, Mines ParisTech CNRS | |
| 16:20 - 16:40 | › Phase-field modeling of ductile fracture - Laura De Lorenzis, Institut für Angewandte Mechanik, Technische Universität Braunschweig | |
| 16:40 - 17:00 | › Fracture as material instability in strain-softening processes: a non-convex variational approach - Giovanni Lancioni, Polytechnic University of Marche | |
| 16:00 - 17:20 | MS13: Multi-scale analysis (Tocqueville) - M. G. D. Geers, A. E. Huespe, S. Loehnert, X. Oliver, P. Wriggers | |
| 16:00 - 16:20 | › Crystal plasticity model for describing fatigue of a lead-free solder under passive temperature cycling - Van Nhat LE, Université de Versailles Saint Quentin-en-Yveline | |
| 16:20 - 16:40 | › High toughness fibrillating interfaces in stretchable electronics - a multi-scale numerical and experimental analysis - Olaf van der Sluis, Eindhoven University of Technology (TU/e), Philips Research | |
| 16:40 - 17:00 | › 3D Fracture Simulation in Porous Graphite - Yelena Vertyagina, University of Oxford (UK) | |
| 19:30 - 22:45 | Banquet on Seine River |
Friday, June 5, 2015
| Time | Event | |
| 09:00 - 09:45 | Plenary: Phase Field Modeling of Brittle and Ductile Fracture in Multi-Field Environments (Marie-Curie) - C. Miehe (Chair J. Oliver) | |
| 09:45 - 10:30 | Plenary: On Toughening in Polymer-Rubber Blends (Marie-Curie) - E. Van der Giessen (Chair J. Oliver) | |
| 10:30 - 10:45 | Coffee break | |
| 10:45 - 12:45 | MS3: Cracking due to coupled processes, including durability mechanics and hydraulic fracture (103) - I. Carol, K. Willam | |
| 10:45 - 11:15 | › Stability of distributed hydraulic fractures against localization: A fundamental problem in fracking of gas shale (Keynote) - Zdenek Bazant, Northwestern University | |
| 11:15 - 11:35 | › Peridynamic modeling of pitting corrosion damage - Ziguang Chen, Mechanical and Materials Engineering, University of Nebraska-Lincoln | |
| 11:35 - 11:55 | › Using the coupled criterion to predict surface cracking induced by oxidation in polymers - Dominique Leguillon, Institut Jean Le Rond d'Alembert | |
| 11:55 - 12:15 | › Utilization of Kinetic Model on the Expansion of Modified AMBT - Nader Ghafoori, Professor at university of Nevada Las Vegas | |
| 10:45 - 12:45 | MS5: Dynamic fracture, fragmentation and impact (112) - A. Combescure, J. Ozbolt | |
| 10:45 - 11:15 | › Gradient Damage Models and Their Use to Approximate Dynamic Brittle Fracture (Keynote) - Tianyi LI, Institut des Sciences de la Mécanique et Applications Industrielles | |
| 11:15 - 11:35 | › Addressing grid sensitivity in Peridynamics: an adaptive refinement approach - Daniele Dipasquale, Department of Industrial Engeenering, University of Padua | |
| 11:35 - 11:55 | › Dynamic fracture of thin shells: an X-FEM approach - Alain Combescure, Institut National des Sciences Appliquées de Lyon | |
| 11:55 - 12:15 | › Accurate Finite Element Modeling of Stresses for Stationary Cracks Under Impact Loading - Alexander Idesman, Texas Tech University | |
| 12:15 - 12:35 | › A local phantom node approach for crack propagation and fragmentation - Jessica Sanders, Lawrence Livermore National Laboratory - Mike Puso, Lawrence Livermore National Laboratory | |
| 10:45 - 12:55 | MS4: Ductile fracture, modeling of shear bands and necking (Condorcet) - P.-O. Bouchard J. M. A. César de Sá , R. H. J. Peerlings | |
| 10:45 - 11:15 | › Unraveling the apparent ductility of martensite: a computational micro-scale analysis (Keynote) - Marc Geers, Eindhoven University of Technology | |
| 11:15 - 11:35 | › A Homogenization model for porous crystals comprising general ellipsoidal voids - Armel Brice Mbiakop Ngassa, CNRS, Ecole Polytechnique | |
| 11:35 - 11:55 | › Molecular dynamics investigation of dynamic effects in fracture of ductile materials - Varun Rajan, Ecole Polytechnique Fédérale de Lausanne | |
| 11:55 - 12:15 | › Void growth and coalescence in an irradiated single crystal - Chao Ling, Section for Research on Irradiated Materials, CEA Saclay, Centre des Matériaux | |
| 12:15 - 12:35 | › High and low stress triaxiality GTN-based ductile failure model - Jose Cesar de Sa, Faculty of Engineering University of Porto | |
| 12:35 - 12:55 | › Numerical simulation of biaxial experiments on stress-state-dependent behavior of ductile metals - Michael Brünig, Bundeswehr University Munich | |
| 10:45 - 12:45 | MS14: Nonlocal damage models and other regularized approaches & ·Transition from damage to fracture (Marie-Curie) - C. Miehe, M. Jirasek, N. Moes | |
| 10:45 - 11:05 | › Isogeometric Implementation of the High-Order Microplane Model for Softening and Localization - Cusatis Gianluca, Northwestern University [Evanston] | |
| 11:05 - 11:25 | › Strain-gradient vs. damage-gradient regularizations of damage models - Duc Trung Le, Institut Jean Le Rond d'Alembert | |
| 11:25 - 11:45 | › Record breaking events in crackling time series - Zsuzsa Danku, University of Debrecen Egyetem [Debrecen] | |
| 11:45 - 12:05 | › Remarks on constitutive laws and influence functions used in the Peridynamic theory - Mirco Zaccariotto, Department of Industrial Engineering, Centre of Studies and Activities for Space | |
| 12:05 - 12:25 | › Isogeometric collocation for phase-field modeling of brittle fracture - Marreddy Ambati, Institut für Angewandte Mechanik, Technische Universität Braunschweig | |
| 12:25 - 12:45 | › Computational modeling of molecular discrete systems: the role of nonlocality on flaw-tolerance - Andrea Infuso, Department of Structural, Geotechnical and Building Engineering | |
| 10:45 - 12:55 | MS13: Multi-scale analysis (Tocqueville) - M. G. D. Geers, A. E. Huespe, S. Loehnert, X. Oliver, P. Wriggers | |
| 10:45 - 11:15 | › A Concurrent Parallel Multiscale Algorithm for Large 3D Continuum/Atomistic Simulations with Applications to Dislocations (Keynote) - William Curtin, Ecole Polytechnique Fédérale de Lausanne | |
| 11:15 - 11:35 | › Compelling issues in modelling concrete with recycled aggregates - Gianluca Mazzucco, Department of Civil, Environmental and Architectural Engineering, University of Padova | |
| 11:35 - 11:55 | › Double scale approaches for the behaviour of a clay rock: full field measurement and FE2 model for hydro-mechanical coupling - Pierre Bésuelle, Laboratoire 3SR | |
| 11:55 - 12:15 | › Multiscale modelling of propagating fracture in quasi brittle materials: a continuum approach - Javier Oliver, Technical University of Catalonia, International Center for Numerical Methods in Engineering | |
| 12:15 - 12:35 | › A Multiscale Formulation for Cohesive Fracture Analysis - Alfredo Huespe, Centro de Investigaciones en Métodos Numéricos | |
| 12:35 - 12:55 | › Fracture of light alloys with unimodal and bimodal grain size distribution: Multiscale simulation - Vladimir V. Skripnyak, Tomsk State University | |
| 12:45 - 16:00 | Lunch, Farewell Wine & Cheese |
|
|