International Conference on Computational Modeling of Fracture and Failure

Registration

Introduction

Marie-Curie

O. Allix, N. Moes, J. Oliver, M. Jirasek

Plenary: Distributed Damage and Enhanced Permeability in Confined Brittle Materials under Triaxial Compression

Marie-Curie

M. Ortiz (Chair N. Moes)

Coffee break

MS9: Industrial applications

103

C. Huchette, J. C. Gálvez

› Influence of residual stresses on lifespan and crack path assessment of a disk blade connection (Keynote) - Benoît Dompierre, Cenaero ASBL 10:45-11:15 (30min)

› Damage evolution in pearlitic steel specimens under tension by means of X-ray computed tomography - Jaime Galvez, Universidad Politécnica Madrid 11:15-11:35 (20min)

› Contribution of advanced and non linear material behavior law for sizing industrial composite structures - Cédric HUCHETTE, Onera - The French Aerospace Lab 11:35-11:55 (20min)

› Investigation in rolling contact fatigue crack growth in rails of SNCF network - Si Hai Mai, SNCF 11:55-12:15 (20min)

› Numerical modelling of sheet-metal blanking using XFEM with ductile fracture - Spela Bolka, Hidria Rotomatika 12:15-12:35 (20min)

MS2: Advances in the Experiment-Modeling Dialog

112

S. Roux, J. Réthoré

› Integration of Micromechanical Measurements to Support Microstructure-Based Modeling (Keynote) - Eric Landis, University of Maine 10:45-11:15 (30min)

› Mechanical behavior and failure of irradiated filled elastomer using molecular dynamics - Morgane Mahaud, Matériaux, ingénierie et sciences 11:15-11:35 (20min)

› Heterogeneity informed quantitative micromechanical approach of ductile fracture in 6xxx aluminium alloys. - Florent Hannard, Université Catholique de Louvain 11:35-11:55 (20min)

› Modelling of concrete fracture at aggregate level using FEM and DEM - Michal Nitka, Gdańsk University of Technology 11:55-12:15 (20min)

› Numerical modeling of propagating compaction bands in brittle granular media - Francois Guillard, School of Civil Engineering 12:15-12:35 (20min)

MS16: Theory of fracture, crack propagation criteria, and crack tracking algorithms

Condorcet

M. Ortiz

› Recent progress and remaining challenges in the mathematics of sharp interface fracture evolution (Keynote) - Christopher Larsen, Department of Mathematical Sciences 10:45-11:15 (30min)

› From micro- to macroscale fracture properties of highly heterogeneous interfaces: towards a perturbation-based numerical method? - Veronique Lazarus, Fluides, automatique, systèmes thermiques 11:15-11:35 (20min)

› Fracture models for elasto-plastic materials as limits of gradient damage models coupled with plasticity: the antiplane case - Rodica Toader, Dipartimento di Matematica e Informatica - Universita Udine 11:35-11:55 (20min)

› Effect of Non-Uniform Stress Field on Bi-dimensional Cohesive Crack Initiation and Propagation - PHAM Tuan Hiep, Laboratoire de Mécanique des Structures Industrielles Durables, Laboratoire de mécanique des solides, EDF R&D 11:55-12:15 (20min)

MS6: Fracture and contact, fretting, cohesive interface models

Fonteneau

F. Gatuingt, J-F. Molinari

› A 3D multiscale cohesive zone model accounting for friction, damage and interlocking - Marco Albarella, Universita' degli studi del Sannio, Dipartimento di Ingegneria 10:45-11:05 (20min)

› A quantitative investigation of the competition between cohesive and adhesive fracture at interfaces - Joris Remmers, Eindhoven University of Technology 11:05-11:25 (20min)

› Mesoscopic analysis of concrete failure behavior under high temperature effects - Guillermo Etse, CONICET and University of Buenos Aires 11:25-11:45 (20min)

› Simulation of ductile fracture of aluminum alloy using a triaxiality dependent cohesive zone model - Anuradha Banerjee, IIT Madras - Faizan Rashid, IIT Madras 11:45-12:05 (20min)

› A mesoscopic approach to study the influence of aggregates spatial arrangement on concrete dynamic behavior - Silvère PIERRE, Laboratoire de Mécanique et Technologie 12:05-12:25 (20min)

› On the development of a cohesive model for crack propagation in wood under relative humidity variations - Ngoc Anh Phan, Institut de Mécanique et d'Ingénierie de Bordeaux 12:25-12:45 (20min)

MS14: Nonlocal damage models and other regularized approaches & ·Transition from damage to fracture

Marie-Curie

C. Miehe, M. Jirasek, N. Moes

› Nucleation, initiation, and propagation of cracks in gradient damage models (Keynote) - Corrado Maurini, Institut Jean Le Rond d'Alembert 10:45-11:15 (30min)

› Phase-field modeling of dynamic instabilities in brittle fracture - Alain Karma, Northeastern University 11:15-11:35 (20min)

› Algorithmic aspects of the efficient phase-field computing of fracture - Tymofiy Gerasimov, Institute of Applied Mechanics (Technische Universität Braunschweig) 11:35-11:55 (20min)

› Relationships between the cohesive zone model (CZM) and thick level set (TLS) damage model for quasi-brittle fracture - Nicolas Moës, Institut de Recherche en Génie Civil et Mécanique 11:55-12:15 (20min)

MS1: Advanced finite element technology for discontinuities and evolving interfaces

Tocqueville

B. Sluys, J. Alfaiate

› A new generalized finite element method for two-scale simulations of propagating cohesive fractures in 3-D (Keynote) - Armando Duarte, University of Illinois at Urbana Champaign 10:45-11:15 (30min)

› A stabilization technique for nearly singular extended finite elements used for static and dynamic crack analysis - Stefan Loehnert, Leibniz Universität Hannover 11:35-11:55 (20min)

› Numerical modelling of load-sequence effects on fatigue crack growth - Lars Voormeeren, TNO, Delft University of Technology, Faculty of Civil Engineering and Geosciences 11:35-11:55 (20min)

› Modelling of Damage in Reinforced Beam-Column Elements with Embedded Discontinuities - Gelacio Juárez-Luna, Departamento de Materiales, Universidad Autónoma Metropolitana 11:55-12:15 (20min)

› Determination of the fracture parameters in three-dimensional structure by the finite element method - lallam mostefa, University of mascara Algeria - Mamouri Said, LMS - University of bechar - Adnan Ibrahimbegovic, Universié de technologie de Compiègne 12:15-12:35 (20min)

Lunch

MS9: Industrial applications

103

P. Massin, Ph. Pasquet

› Computational and Experimental Fracture Assessment of a Cracked Hand Wheel - Goran Vukelic, Faculty of Maritime Studies, University of Rijeka 13:45-14:05 (20min)

› Modelling and Simulation of TB32 Crash Test of N2-W4-A Category Safety Barrier on Road Bend - Marian Klasztorny, Military University of Technology, Faculty of Mechanical Engineering, Department of Mechanics and Applied Computer Science 14:05-14:25 (20min)

› Modeling Failure Progression in Structures Informed by Demolition and Forensic Experience - Francesca Brando, Thornton Tomasetti 14:25-14:45 (20min)

› Current status in fuel performance codes of cracks and damage modelling - Thomas Helfer, French Alternative Energies and Atomic Energy Commission, Fuel Study Department, Fuel Simulation Laboratory 14:45-15:05 (20min)

› Finite Element Analysis of Ductile Fracture during Shearing Process of Shield Slot Plate for Molten Carbonate Fuel Cell - Ho Won Lee, Korea Institute of Materials Science 15:05-15:25 (20min)

MS2: Advances in the Experiment-Modeling Dialog

112

S. Roux, J. Réthoré

› X-DIC for ductile tearing monitoring using ultra high resolution cameras - Michel CORET, Institut de Recherche en Génie Civil et Mécanique 13:45-14:05 (20min)

› Mode I-III Decomposition of the J-integral from Digital Image Correlation Displacement Data - Matthew Molteno, Université de Stellenbosch 14:05-14:25 (20min)

› Crack propagation in inelastic pre-strained specimen - Sven von Ende, Rolls-Royce Germany 14:25-14:45 (20min)

› Mixed mode fracture of mortar joints in masonry buildings - Marie Sauve, Institut de Mécanique et d'Ingénierie de Bordeaux 14:45-15:05 (20min)

› Experimental database for mixed-mode crack propagation in concrete: comparison between experimental and numerical results using full-field measurements - Andreea Carpiuc-Prisacari, Laboratoire de Mécanique et Technologie 15:05-15:25 (20min)

› Extraction of SIFs and crack tip detection for curved cracks using digital images - Julien Réthoré, Laboratoire de Mécanique des Contacts et des Structures 15:25-15:45 (20min)

MS16: Theory of fracture, crack propagation criteria, and crack tracking algorithms

Condorcet

C. Larsen, F. Bobaru

› On the morphology of dynamic cracks surfaces and how to resolve them computationally - Florin Bobaru, University of Nebraska - Lincoln 13:45-14:05 (20min)

› Study of fracture patterns generated by different failure criteria in ordinary state-based Peridynamics - Giulia Sarego, Department of Industrial Engineering, University of Padua, Centre of Studies and Activities for Space "G. Colombo" 14:05-14:25 (20min)

› Representation of stress in plane cracked solids with Laurent series - Gaetan Hello, Laboratoire de Mecanique et d'Energetique d'Evry 14:25-14:45 (20min)

› Crack-surface based path-following control for phase-field modeling of brittle fracture - nitish singh, Eindhoven University of Technology 14:45-15:05 (20min)

› Mixed mode fracture separation in orthotropic media due to mechanical and thermal effects - Rostand Moutou Pitti, Institut Pascal 15:05-15:25 (20min)

MS10: Innovative trends and applications in fracture mechanics

Fonteneau

U. Perego

› Fail-safe Design of Structures Based on the Material Force Approach and Uncertainty Analysis (Keynote) - Michael Kaliske, Technische Universität Dresden 13:45-14:15 (30min)

› Explicit simulation of blade cutting and through-the-thickness fracture in multi-layer, thin-walled structures - Federica Confalonieri, Dipartimento di Ingegneria Civile e Ambientale, Politecnico di Milano 14:15-14:35 (20min)

› Comparison of fracture prediction models on sheet metal blanking simulations - Cristian Canales, Department of Aerospace and Mechanical Engineering, University of Liège 14:35-14:55 (20min)

› Analyzing 3D cracks using arbitrary tetrahedral meshes - Morteza Nejati, Imperial College London 14:55-15:15 (20min)

› Investigation into the rupture of the grains in an granular material in an oedometric loading and the fracture energy - Aymen Seyf Eddine Salhi, University of Biskra laboratoire de recherche Génie civil 15:15-15:35 (20min)

MS14: Nonlocal damage models and other regularized approaches & ·Transition from damage to fracture

Marie-Curie

C. Miehe, M. Jirasek, N. Moes

› A Geometry-Based Anisotropic Gradient-Enhanced Damage Model for Modelling Masonry Failure (Keynote) - Bram Vandoren, Hasselt University, Faculty of Engineering Technology 13:45-14:15 (30min)

› Modelling of microcracking in microtomography image-based models of cement materials using phase field method - Julien YVONNET, Université Paris-Est 14:15-14:35 (20min)

› A transient gradient damage model based on the homogenization of inter-granular failure - Leong Hien Poh, National University of Singapore 14:35-14:55 (20min)

› Nonlocal Regularization for Loss of Ellipticity in Inelastic Problems - Alejandro Mota, Sandia National Laboratories [Livermore] 14:55-15:15 (20min)

MS1: Advanced finite element technology for discontinuities and evolving interfaces

Tocqueville

B. Sluys, J. Alfaiate

› Mixed-mode fracture in strong discontinuities - Jorge ALFAIATE, 1Department of Civil Engineering, Architecture and Geosciences, Técnico, Universidade de Lisboa 13:45-14:05 (20min)

› Cohesive crack with friction growing at the interface between dissimilar isotropic materials - silvio valente, Politecnico di Torino [Torino] 14:05-14:25 (20min)

› An adaptive body-fitted monolithic method for modeling the fracture of heterogeneous microstructures - Modesar Shakoor, Centre de Mise en Forme des Matériaux 14:25-14:45 (20min)

› On the treatment of crack boundary conditions in phase field models of dynamic fracture - Michael Strobl, Institute of Mechanics, Karlsruhe Institute of Technology 14:45-15:05 (20min)

› Finite element interface model for simulating delamination using a thick level set approach - mohammad latifi, TU Delft 15:05-15:25 (20min)

Coffee break

MS7: Fracture and damage of composites and laminates

103

J. Remmers

› Dynamic effects in unidirectional fiber-reinforced composites: a peridynamic analysis - Florin Bobaru, University of Nebraska - Lincoln 16:00-16:20 (20min)

› A New Mixed DEM/FEM Approach to Model Advanced Damage of Reinforced Concrete - Serguei Potapov, Institut des Sciences de la Mécanique et Applications Industrielles, Électricité de France - R&D 16:20-16:40 (20min)

› A mesh independent simplified cohesive segment method to model matrix cracking in composites. - Supratik Mukhopadhyay, Advanced Composites Centre for Innovation and Science 16:40-17:00 (20min)

› Modelling multiple delamination and intralaminar cracks using a single-layer shell approach - Martin Fagerström, Chalmers University of Technology 17:00-17:20 (20min)

› Translaminar fracture of WRM composite using Random Spring Network - Anuradha Banerjee, IIT Madras 17:20-17:40 (20min)

› A computational approach to the ultimate failure of unidirectional ceramic-matrix composites - Guillaume Couégnat, Laboratoire des Composites Thermostructuraux 17:40-18:00 (20min)

MS15: Quasi-brittle failure with applications to concrete and fiber-reinforced concrete

112

G. Pijaudier-Cabot

› Numerical Simulation of Fracturing in Steel Fiber Reinforced Concrete Structures using Interface Solid Elements - Yijian Zhan, Institute for Structural Mechanics, Ruhr-University Bochum 16:00-16:20 (20min)

› Embedded Finite Element Method based on plate-kinematics for reinforced concrete elements - Ejona Kishta, Laboratoire d'Etudes de Mécanique Sismique 16:20-16:40 (20min)

› Numerical simulations to determine the constitutive parameters of the oxide layer in corrosion of reinforced concrete - Beatriz Sanz, Universidad Politécnica de Madrid, Dep. Ciencia de Materiales 16:40-17:00 (20min)

› A Smooth unloading-reloading approach for modelling quasi-brittle failure - Waled Alnaas, Cardiff University 17:00-17:20 (20min)

› General sequentially linear method for saw-teeth constitutive relations - Jan Elias, Brno University of Technology, Faculty of Civil Engineering, Institute of Structural Mechanics 17:20-17:40 (20min)

› Eigenerosion: extension and applications to heterogeneous media - Lionel Bichet, Laboratoire de mécanique et génie civil, Laboratoire de micromécanique et intégrité des structures 17:40-18:00 (20min)

MS16: Theory of fracture, crack propagation criteria, and crack tracking algorithms

Condorcet

V. Lazarus, N. Moës

› Three-dimensional crack nucleation, growth and coalescence using the Thick Level Set approach to fracture - Nicolas Moës, Ecole Centrale de Nantes 16:00-16:20 (20min)

› 3D crack propagation with X-FEM cohesive elements - Patrick Massin, Institute of Mechanical Sciences and Industrial Applications 16:20-16:40 (20min)

› Fast marching method for threedimensional crack propagation - Matthieu Le Cren, Laboratoire de Mécanique des Structures Industrielles Durables 16:40-17:00 (20min)

› Finite-element modeling and analyses for quasicrystals with cracks - Zhibin Wang, Institute of Mechanics, University of Kassel 17:00-17:20 (20min)

› Crack path predictions and experiments in structures with interfaces - Paul Judt, University of Kassel, Institute of Mechanics 17:20-17:40 (20min)

› Modelling of Quasi-Brittle Fracture in Large Scale Coarse Mesh Finite Element Models using the FEMME (Finite Element Microstructure MEshfre) Multiscale Model - Luis Saucedo-Mora, University of Oxford, Department of Materials 17:40-18:00 (20min)

MS10: Innovative trends and applications in fracture mechanics

Fonteneau

M. Kaliske

› Design of Sheet Metal Forming Process for Reducing the Stress Concentration of Corrugated Plate for Molten Carbonate Fuel Cell - Young-Seok Oh, Korea Institute of Materials Science 16:00-16:20 (20min)

› Influence of Autocorrelation Length in Random Lattice-Particle Model - Jana Kaderova, Brno University of Technology 16:20-16:40 (20min)

› Strain Rate Influence on the Elastoplastic Damage Behaviour of Nodular Cast Iron - Ivica Skozrit, Faculty of Mechanical Engineering and Naval Architecture 16:40-17:00 (20min)

MS14: Nonlocal damage models and other regularized approaches & ·Transition from damage to fracture

Marie-Curie

C. Miehe, M. Jirasek, N. Moes

› Smeared damage model and crack localization for RC multi-fiber beam descriptions - Jacky Mazars, Grenoble Institute of Technology 16:00-16:20 (20min)

› Experimental and theoretical investigations of concrete fatigue using damage approach with non-local softening - Ireneusz Marzec, Gdańsk University of Technology 16:20-16:40 (20min)

› Combined XFEM-continuous damage mechanics approach for three dimensional concrete crack propagation - Simon-Nicolas Roth, Hydro-Québec Production 16:40-17:00 (20min)

› Formulation of a constitutive law with a gradual transition from continuous to discontinuous descriptions of cracks in concrete - Jerzy Bobinski, Gdansk University of Technology 17:00-17:20 (20min)

› Intermittency and localization in quasi-brittle failure of heterogeneous materials: A numerical and analytical study - Estelle Berthier, Institut Jean Le Rond d'Alembert 17:20-17:40 (20min)